| Customization: | Available |
|---|---|
| After-sales Service: | Within One Hour |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The hydraulic side shift adjustment enables you to shift the machine to the right. The side shift adjustment means that you can cut at the side of your tractor and thereby reach ditch edges and the median strip of roads, which would otherwise be difficult to reach. The hydraulic side shift adjustment enables you to drive with just one pair of wheels in the uncut area and cut closer to ditches, fences, etc.
The mower has an openable flap. You open the flap when you know you are cutting or topping ground that generates a higher flow of material. This enables you to drive freely under the same conditions as with a closed flap and a normal flow of material. You save on fuel and reduce wear on the belts, and you can also operate at a higher speed, as the grass does not become twisted around the roller. The grass is also spread more evenly.
The verge flail mower's chassis is made of 4 mm thick steel, and the side plate is 6 mm thick.
The machine's cutting head can be angled 90° upwards and 60° downwards.
The verge flail mower is supplied with PTO drive shaft, transmission oil and hydraulic hoses as standard.
The mower requires two double-acting hydraulic outlets on the tractor. The verge flail mower is supplied with four hydraulic ½ inch, quick coupling male hoses.
| Model | Cutting Width | Machine width | NO. Of Hammer on double spiral rotor | Weight(KG) | HP |
| AGFK140 | 1380mm | 1400mm | 14pcs of 1200g | 594 | 40-90hp |
| AGFK160 | 1580mm | 1600mm | 14pcs of 1200g | 625 | 50-90hp |
| AGFK180 | 1780mm | 1800mm | 16pcs of 1200g | 651 | 60-90hp |
| AGFK200 | 1980mm | 2000mm | 18pcs of 1200g | 700 | 60-90hp |
| AGFK220 | 2180mm | 2200mm | 20pcs of 1200g | 706 | 60-90hp |
){kind=link}